|
EN |
European Committee for Standardization |
| |
|
| |
36 rue de
Stassar |
| |
B-1050 Bruxelles |
| |
Belgium |
| |
Tel
(32) 2 550 08 11 |
| |
Fax
(32) 2 550 08 19 |
|
Web
site: www.cenorm.be |
| |
|
|
|
| 39 |
Steel
tubes for scaffolding |
| 253 |
Preinsulated bonded pipe systems for underground hot water networks - pipe
assembly of steel service |
| |
pipes,
polyurethane thermal insulation and outer casing of polyethylene |
| 448 |
Preinsulated bonded pipe systems for underground hot water networks -
fitting assemblies of steel service |
| |
pipes,
polyurethane thermal insulation and outer casing of polyethylene |
| 489 |
Preinsulated bonded pipe systems for underground hot water networks - joint
assembly for steel service |
| |
pipes,
polyurethane thermal insulation and outer casing of polyethylene |
| 545 |
Ductile
iron, pipes, fittings, accessories and their joints for water pipelines -
requirements and test methods |
| 598 |
Ductile
iron pipes, fittings, accessories and their joints for sewerage application
- requirements & test methods |
| 640 |
Reinforced concrete pressure pipes and distributed reinforcement concrete
pressure pipes (non-cylinder |
| |
type),
including joints and fittings |
| 641 |
Reinforced concrete pressure pipes, cylinder type, including joints and
fittings |
| 642 |
Prestressed concrete pressure pipes, cylinder and non-cylinder, including
joints, fittings and specific |
| |
requirements for prestressing steel for pipes |
| 969 |
Ductile
iron pipes, fittings accessories and their joints for gas pipelines -
requirements and test methods |
| 1057 |
Copper
and copper alloys - seamless, round copper tubes for water and gas in
sanitary and heating |
| |
applications |
| 1127 |
Stainless steel tubes - dimensions, tolerances and conventional masses per
unit length |
| 9455
- 12 |
Soft
soldering fluxes - test methods - steel tube corrosion test |
| 10208 |
Steel
pipes for pipelines for combustible fluids - technical delivery conditions |
| 10208
- 1 |
Steel
pipes for pipelines for combustible fluids - technical delivery conditions -
pipes of requirement class A |
| 10208
- 2 |
Steel
pipes for pipelines for combustible fluids - technical delivery conditions -
pipes of requirement class B |
| 10210
- 1/2 |
Hot
finished structural hollow sections of non-alloy and fine grain structural
steel |
| 10210
- 1 |
Hot
finished structural hollow sections of non-alloy and fine grain structural
steels - technical delivery |
| |
requirements |
| 10210
- 2 |
Hot
finished structural hollow sections of non-alloy and fine grain structural
steels - tolerances, dimensions |
| |
and
sectional properties |
| 10216
- 1 |
Seamless steel tubes for pressure purposes |
| 10216
- 2 |
Seamless steel tubes for pressure purposes - technical delivery conditions -
unalloyed and alloyed steels |
| |
with
specified elevated temperature properties |
| 10216
- 4 |
Seamless steel tubes for pressure purposes - technical delivery conditions -
unalloyed and alloyed steels |
| |
with
specified low temperature properties |
| 10216
- 5 |
Seamless steel tubes for pressure purposes - stainless steel tubes |
| 10217
- 1 |
Welded
steel tubes for pressure purposes - technical delivery conditions -
unalloyed steels with specified |
| |
room
temperature properties |
| |
Carbon
steel tubes suitable for welding or threading |
| 10217
- 2 |
Welded
steel tubes for pressure purposes - technical delivery conditions -
unalloyed and alloyed steels with |
| |
specified elevated temperature properties |
| 10217
- 4 |
Welded
steel tubes for pressure purposes - technical delivery conditions - ERW
unalloyed and alloyed steels |
| |
with
specified low temperature properties |
| 10217
- 5 |
Welded
steel tubes for pressure purposes - technical delivery conditions -
submerged arc welded unalloyed |
| |
and
alloyed steels with specified elevated temperature properties |
| 10217
- 7 |
Welded
steel tubes for pressure purposes - technical delivery conditions -
stainless steels |
| 10219 - 1/2 |
Cold formed welded
structural hollow sections of non-alloy and fine grain steels |
| 10219 - 1 |
Cold formed welded
structural hollow sections of non-alloy and fine grain steels - technical
delivery conditions |
| 10219 - 2 |
Cold formed welded
structural hollow sections of non-alloy and fine grain steels - tolerances,
dimensions |
| |
and sectional
properties |
| 10220 |
Seamless and welded
steel tubes - dimensions and masses per unit length |
| 10224 |
Steel pipes, joints
and fittings for the conveyance of aqueous liquids including potable water |
| 10225 |
Weldable structural
steels for fixed offshore structures |
| 10232 |
Metallic materials -
tubes (in full section) - bend test |
| 10233 |
Metallic materials -
tubes - flattening test |
| 10234 |
Metallic materials -
tubes - drift expanding test |
| 10235 |
Metallic materials -
tubes - flanging test |
| 10236 |
Metallic materials -
tubes - ring expanding test |
| 10237 |
Metallic materials -
tubes - ring tensile test |
| 10240 |
Internal and/or
external protective coatings for steel tubes - specification for hot dip
galvanized coatings |
| |
applied in automatic
plants |
| 10246 - 1 |
Non destructive
testing of steel tubes - automatic electromagnetic testing of seamless and
welded (except |
| |
submerged arc
welded) ferromagnetic steel tubes for verification of hydraulic
leak-tightness |
| 10246 - 4 |
Non destructive
testing of steel tubes - automatic full peripheral magnetic transducer/flux
leakage testing of |
| |
seamless
ferromagnetic steel tubes for the detection of transverse imperfections |
| 10246 - 5 |
Non destructive
testing of steel tubes - automatic full peripheral magnetic transducer/flux
leakage testing of |
| |
seamless and welded
(except submerged arc welded) ferromagnetic steel tubes for the detection of |
| |
longitudinal
imperfections |
| 10246 - 6 |
Non destructive
testing of steel tubes - automatic full peripheral ultrasonic testing of
seamless steel tubes for |
| |
the detection of
transverse imperfections |
| 10246 - 7 |
Non destructive
testing of steel tubes - automatic full peripheral ultrasonic testing of
seamless and welded |
| |
(except submerged
arc welded) steel tubes for the detection of longitudinal imperfections |
| 10246 - 8 |
Non destructive
testing of steel tubes - automatic ultrasonic testing of the weld seam of
electric resistance |
| |
and induction welded
steel tubes for the detection of longitudinal imperfections |
| 10246 - 9 |
Non destructive
testing of steel tubes - automatic ultrasonic testing of the weld seam of
submerged arc- |
| |
welded steel tubes
for the detection of longitudinal and/or transverse imperfections |
| 10246 - 10 |
Non destructive
testing of steel tubes - radiographic testing of the weld seam of submerged
arc-welded steel |
| |
tubes for the
detection of imperfections |
| 10246 - 14 |
Non destructive
testing of steel tubes - automatic ultrasonic testing for the detection of
laminal imperfections |
| |
for seamless and
welded (except submerged arc-welded) steel tubes |
| 10246 - 15 |
Non destructive
testing of steel tubes - automatic ultrasonic testing of strip/plate used in
the manufacture of |
| |
welded steel tubes
for the detection of laminar imperfections |
| 10246 - 16 |
Non destructive
testing of steel tubes - automatic ultrasonic testing of the area adjacent
to the weld seam of |
| |
welded steel tubes
for the detection of laminal imperfections |
| 10246 - 17 |
Non destructive
testing of steel tubes - ultrasonic testing of tube ends of seamless and
welded steel tubes |
| |
for the detection of
laminar imperfections |
| 10246 - 18 |
Non destructive
testing of steel tubes - magnetic particle inspection of the tube ends for
the detection of |
| |
laminar
imperfections of the detection of seamless and welded steel tubes |
| 10255 |
Carbon steel tubes
suitable for welding or threading |
| 10256 |
Non destructive
testing of steel tubes - qualification and competence of levels 1 and 2 non
destructive |
| |
testing personnel |
| 10297 - 1 |
Steel tubes for
general mechanical applications |
| 10305 - 1 |
Precision steel
tubes |
| 11960 |
Petroleum and
natural gas industries - steel pipes for use as casing or tubing for wells |
| 11961 |
Petroleum and
natural gas industries - steel pipes for use as drill pipes - specification |
| |
|